﻿Hybrid Project - Autopilot Updater v1.9
============================================

1. Keep all the files from this folder together.
2. Power on the plane and plug in the autopilot via micro-USB
   (the order doesn't matter, but the plane must be on).
   Close Mission Planner or any other ground-station software first.
3. Run AutopilotUpdater-v1.9.exe and work down the three steps:

   1  Detect the autopilot.
   2  Flash the firmware - only when the firmware version has changed.
   3  Write the parameters - review the list of changes, untick anything
      you want left alone, then write.

The app checks which Cube you have (Orange or Orange+) and picks the right
firmware file automatically. Your autopilot's own calibration is kept unless
you tick Overwrite calibration in step 3.

If Windows shows "Windows protected your PC", click More info, then Run anyway.
